Hypertherm Powermax 30 Air Plasma Cutter #088096 with Built-in Compressor
Built-in air compressor—no need for shop air! Just plug it in and start cutting.
Experience the cutting power of the Powermax 30 AIR, a plasma arc cutting system featuring an integrated air compressor. This efficient tool enables you to effortlessly cut through electrically conductive metals such as mild steel, stainless steel, and aluminum, with a thickness capacity of up to 10 mm (3/8 inches). It also excels at piercing, with the ability to handle materials up to 6 mm (1/4 inch) thick.
Mechanized plasma torches commonly generate thermal plasma using direct current (DC) discharge, although it can also be generated using alternating current (AC) or radiofrequency. The Powermax 30 Air offers exceptional versatility by allowing you to use it anywhere, thanks to its lightweight and portable design. Simply plug it into a 120 or 240 outlet and utilize the internal air compressor for cutting, eliminating the need for shop air.
To ensure optimal performance, register your Hypertherm Product and take advantage of the Hypertherm Warranty. Guarantee that your product functions flawlessly and enjoy peace of mind in your cutting endeavors.
Benefits of the Powermax 30 AIR:
Portable operation
Internal air compressor lets you operate anywhere—maximum portability and ease of use
Plugs into either a 120-volt or 240-volt outlet with the included plug adapters
Lightweight, ergonomic hand torch reduces cramping and soreness
Adding to its portability, it’s the lightest and smallest system in its class
Faster, more versatile
High efficiency: fast cutting speeds and amazing cut quality reduces secondary operations
Continuous pilot arc feature lets you quickly and easily cut rusted metal or metal grate without retriggering
One tool for a variety of cutting functions - large range of metal thicknesses and types
Reliable, robust, and cost-effective
Internal air compressor eliminates the unnecessary costs of external air compressors
Rugged design withstands the elements
High performance from Hypertherm, a trusted brand
What's Included:
The Hypertherm Powermax 30 Air comes with everything you need to get started. A complete set of consumables are pre-installed on the AIR T30 torch, including:
Electrode (#420132)
Swirl ring (#420133)
Nozzle (#420134)
Retaining cap (#420135)
Deflector (#420399)
Extra nozzle (#420134)
Extra electrode (#420132)
Carrying strap
Quick setup card
Operator’s, safety, and compliance manuals
With a 15-foot lead, the AIR T30 also includes a work clamp (with a 15-foot lead) and a 10-foot power cord, plus adapters for both 120-volt & 240-volt outlets.
Oxy-fuel welding and cutting for CNC efficiency
Oxy-fuel welding and cutting (also referred as oxyacetylene welding, oxy welding, or gas-welding) are processes that use fuel gases to burn pure oxygen to achieve high temperatures—allowing the user to weld and cut metals.
Plasma cutting and welding vs. oxy-fuel welding and cutting
The average cost of using a plasma torch is about 37% cheaper per foot, which, over time can save you a big chunk of change. In regions with high labor rates, such as the US, Canada, Europe, etc., it’s extremely important to achieve the highest efficiency possible to maximize your profit. Due to its ability to obtain a high-capacity and high-speed in fabrication operations, plasma torches are the clear-cut preference over oxy-fuel torches.
Plasma Cutting:
Faster, high-quality cuts
Smaller, precise kerf width
Plasma cutters will cut any metal—steel, stainless steel, nickel, aluminum, copper, brass, magnesium, titanium, cobalt, and so on
110V or 220V outlets will give you the same cut!
Cleaner, newer technology
LESS EXPENSIVE in the long run
Oxy Fuel Cutting:
Slow cuts with more secondary operations
Limited to cutting carbon steel
Runs on fuel, which is more expensive than electricity
I really liked the fact that the consumable kit and accessories were half off with the purchase of the plasma cutter. Other websites did not offer that discount.
Product Questions and Answers
Q - What consumables are included?A - The AIR T30 torch has an electrode, swirl ring, nozzle, retaining cap and deflector already installed. An extra nozzle and electrode are included in the package.
Q - How much does it weigh?A - 29.8 lbs with the torch and 15' lead.
Q - How long is the power cord?A - 10 feet.
Q - What is the cut capacity on 120v power?A - 10 gauge at 30 IPM, 1/4" at 14 IPM, 3/8" at 5 IPM
Q - 120V or 240V?A - You can plug into either. There are adaptors for both.
Q - Is the Hypertherm Powermax 30 Air portable?A - Yes. The Hypertherm Powermax 30 Air comes with a carrying handle as is light enough to carry comfortably.
Q - How long is the cord?A - The Hypertherm Powermax 30 Air has a 10-foot power cord and a 15-foot lead.
Have a question about this product? Submit your question using the form below
Documents
Videos
Internal Air Compressor
Lightweight & Portable
Ergonomic Hand Torch
15' Lead, 10' Power Cord
3-Year Power Warranty
View all Hypertherm 
