Hypertherm Powermax 65/85/105 Nozzle 65A #220819 (Pack of 5)
Part Number: 220819
UPC: 00662310314729
$38.10
$47.50*
SAVE $9.40
Documents
VideosHypertherm Powermax 65/85/105 Nozzle 65A #220819
The Hypertherm Powermax 65/85/105 Nozzle 65A #220819 from Welders Supply is specially designed for the Hypertherm Powermax 65 plasma cutter. The nozzle -- with plasma cutter electrodes -- helps heat gas into plasma. Powered plasma cutter electrodes and nozzles touch the metal, causing a spark to form and heat gas into plasma. The Hypertherm Powermax 65/85/105 Nozzle 65A #220819 for the Hypertherm Powermax 65 plasma cutter directs the flow of plasma for precision cutting. Nozzles can be damaged in a number of ways.
- Touching the metal, piercing beyond limits or cutting too fast can damage the nozzle from the outside. For the most part, you can pierce up to 35% of the rated thickness of your system.
- Being too aggressive when piercing can cause immediate damage to the nozzle. Take special care to keep the correct distance between the nozzle and the cut.
- Damaged nozzles should be checked often and – if needed-- replaced right away. These plasma cutter nozzles come in packs of five, making them very cost affordable.
- A great selection of high-value and dependable plasma cutter consumables are available at Welders Supply.
Shop other Hypertherm products, Plasma Cutting Machines, Accessories, Welding Helmets, Helmet Accessories, Gloves, Jackets, Aprons, Caps, and Pants.
Related Products:
Hypertherm HPR130XD & HPR260XD Consumables Mild Steel Nozzle #220188
Hypertherm HPR130XD & HPR260XD Consumables Mild Steel Nozzle #220182
Hypertherm HPR130XD & HPR260XD Consumables Mild Steel Nozzle #220806
Hypertherm HPR130XD & HPR260XD Consumables Mild Steel Nozzle #220646
Hypertherm HPR130XD & HPR260XD Consumables Mild Steel Shield #220194
Shop all Hypertherm products and accessories or browse plasma cutting machines and plasma cutting consumables available online at Welders Supply.
Compatible with the following plasma cutting machines:
Accessories
Consumables
Product Questions and Answers
Q - Do I need to replace anything else when I replace the nozzle?
A - It is recommended that when a nozzle wears out, the electrode is replaced, and when an electrode is replaced, the nozzle should also be replaced to keep cuts consistent and precise.
Q - When should I change the nozzle?
A - You should change your nozzle whenever you see notching, an orifice that isn't round, or rounded edges during your regular inspection.
Q - What does the nozzle do?
A - Nozzles focus the arc by funneling gas flow.
Have a question about this product? Submit your question using the form below
Related Products
Hypertherm
Powermax 45XP/65/85/105 Electrode (5-pk) #220842
3890 purchased
Save
$11.55
$50.95
$62.50
Hypertherm
Powermax 45XP/65/85/105 Nozzle 45A (5-pk) #220941
1607 purchased
Save
$2.10
$44.40
$46.50
Hypertherm
Powermax 65 Handheld Consumable Spare s Kit #851465
284 purchased
Save
$63.70
$210.30
$274.00
$700 MFR Rebate
Miller Welding
Spectrum 875 Plasma Cutter w/ 80° Hand Torch, 20' or 50' Leads (220V 1PH) #907583
(9)
102 purchased
Starting at $3,675.00
Free Shipping
Competitive Products
FREE $1,006 Accessory Kit
Hypertherm
Powermax 125 Plasma Cutter w/ 25' 85° Hand Torch & CPC Port (480V 3PH) #059536
13 purchased
$9,300.00
Free Shipping
FREE $438 Accessory Kit
Hypertherm
Powermax30 Air Plasma Cutter w/ Built-In Compressor, Building America Decal (120/240V 1PH) #088096
(1)
591 purchased
Save
$91.00
$2,249.00
$2,340.00
Free Shipping
FREE $438 Accessory Kit
Hypertherm
Powermax30 XP Plasma Cutter w/ 15' Hand Torch, Standard Consumables (120/240V 1PH) #088079
(1)
1216 purchased
Save
$51.00
$1,859.00
$1,910.00
Free Shipping