Hobart Handler® 125 MIG Welder #500573

Hobart Handler® 125 MIG Welder #500573 - From Miller Electric

A reliable, portable wire feed MIG welder that’s perfect for a variety of projects. Runs on 120V input power, welds up to 3/16 in. mild steel, and is MIG capable with a built-in gas valve. Built by Hobart, a subsidiary of Miller Electric.

Easy-to-Use, Ready-to-Weld.

The Handler 125 is a reliable constant-voltage DC welder with built-in wire feeder that operates on common 120-volt power. It comes ready to weld, without shielding gas, using .030–.035 inch (0.8–0.9 mm) self-shielding flux-cored wire. It can weld 24-gauge to 3/16-inch steel with flux-cored wire. This welder is equipped with a factory-installed gas solenoid. With the addition of an optional regulator and shielding gas, you’re ready to MIG weld with .023–.030 inch (0.6–0.8 mm) solid wire in the traditional two-knob control mode. Use C-25 gas (75% argon/25% CO2) on 24 gauge–1/8 inch steel for a cleaner weld with less spatter. Use Tri-Mix gas and stainless wire for welding on 18–12 gauge stainless steel.

What's Included

• Comfortable 8 ft. (2.4 m) H-9D gun with liner for .030-.035 in. (0.8 -0.9 mm) diameter wire.
• Work cable with clamp
• (2) - 0.030 (0.8 mm) contact tips
• Power cord with molded plug
• Weld set -up chart
• Owner’s manual with installation, operation and maintenance guidelines.

Applications

• Light maintenance/repair Auto body
• DIY Farm/ranch
• Metal art Fences/gates

Features of the Handler® 125

Four output voltage settings

• Four voltage ranges allow you to adjust the arc for different thicknesses.

Factory-installed gas solenoid

• Easy for you to change from flux-cored wire to MIG welding.

Built-in contactor

• Keeps wire electrically "cold" until trigger is pulled which gives you ease of use.

Durable feed head with quick-release drive roll tension lever

• Positive feed with adjustable tension gives you easy access to thread new wire.

Spool hub assembly accommodates 4- or 8- inch spools

• Offers you flexibility to use small or large spools of wire to better suit your welding needs.

Self- resetting thermal overload protection

• Protects power transformer from thermal overload to provide you maximum reliability.

Broad output range of 25 – 130 Amps.

• Allows you to weld up to 1/8 in. steel with flux-cored wire.

Shop all Hobart and Miller welding equipment at the best prices online, from Welders Supply.

This product replaces these legacy models:

• HOBART HANDLER 100 #500572

• Spec Sheet - Hobart Handler 125 #500573

Product Questions and Answers

Have a question about this product? Submit your question using the form below