Hypertherm FineCut Nozzle #220930 (pack of 5)
Part Number: 220930
UPC: 00662310314736
$42.00
$48.76*
SAVE $6.76
Documents
VideosHypertherm FineCut Nozzle #220930 (pack of 5)
When it comes to completing a project the first time around, the 220930 Hypertherm FineCut Nozzle is a cut above the rest.
- The patented technology in the FineCut nozzle provides a faster cut speed and unparalleled cut quality.
- These 45 amp nozzles can be used on a variety of PowerMax plasma cutters to produce some of the thinnest and most accurate kerf cuts possible.
- Because of its compatibility with the Powermax 45, Powermax 65, Powermax 85, and Powermax 105 plasma systems, the 220930 Hypertherm FineCute Nozzle can cut with manual hand, robotic, and machine torches.
For laser cut quality with long-lasting durability, order a FineCut Nozzle 5-pack from Hypertherm.
Hypertherm FineCut Nozzle #220930 (pack of 5)
Features and Benefits: |
|
| Consumable Life | Patented quality drastically prolongs consumable life |
| Readiness | Tool-free installation allows you to install the nozzle for your next job quickly |
| Finest of cuts | Narrower kerf allows for intricate and detailed designs |
| Adaptability | Nozzle adapts to manual and machine-mounted torches for all types of fine cuts |
| Vented shield™ | The nozzle is electrically isolated to prevent double arcing, the vent holes around the orifice stabilize the arc, cool the consumables, and protect them from spatter. |
| TrueFlow™ | TrueFlow™ allows for centered electrode alignment with the water tube to ensure optimal cooling, which increases life and produces a higher and consistent cut quality |
| Quality | Made in the USA |
Shop other Hypertherm Products, Plasma Cutting Consumables, Plasma Cutting Machines, Accessories, Welding Helmets, Helmet Accessories, Gloves, Jackets, Aprons, Caps, and Pants.
Plasma System Adaptability:
The nozzle can adapt to the following Hypertherm Plasma cutting systems.
- Powermax45 XP plasma system
- Powermax65 XP plasma system
- Powermax85 XP plasma system
- Powermax105 XP plasma system
Torch Adaptability:
The nozzle can adapt to the following Hypertherm Plasma torches
- 15° Duramax hand torch
- 75° Duramax hand torch
- 180° Duramax machine torch
- 180° Duramax mini-machine torch
- 45° Duramax robotic torch
- 90° Duramax robotic torch
- 180° Duramax robotic torch
Operating ranges: 30 A - 45 A
SHIPPING DIMENSIONS |
|
| Height: | 2.00 Inches |
| Width: | 4.00 Inches |
| Length: | 4.00 Inches |
| Weight: | 1 Lb(s) 0 Oz |
Accessories
Consumables
Product Questions and Answers
Q - Do I need to replace anything else when I replace the nozzle?
A - It is recommended that when a nozzle wears out, the electrode is replaced, and when an electrode is replaced, the nozzle should also be replaced to keep cuts consistent and precise.
Q - When should I change the nozzle?
A - You should change your nozzle whenever you see notching, an orifice that isn't round, or rounded edges during your regular inspection.
Q - What does the nozzle do?
A - Nozzles focus the arc by funneling gas flow.
Have a question about this product? Submit your question using the form below
Related Products
$700 MFR Rebate
Miller Welding
Spectrum 875 Plasma Cutter w/ 80° Hand Torch, 20' or 50' Leads (220V 1PH) #907583
(9)
104 purchased
Starting at $3,675.00
Free Shipping
Competitive Products
Hypertherm
Powermax 45A FlushCut Starter Consumable Kit - 428746
58 purchased
Save
$44.15
$175.85
$220.00
Hypertherm
Powermax 45XP/65/85/105 Nozzle 45A (5-pk) #220941
1612 purchased
Save
$2.10
$44.40
$46.50
