HYPERTHERM POWERMAX125 POWER SUPPLY WITH CPC & SERIAL PORTS (460V)
Upgrade your cutting capabilities with the Hypertherm Powermax125 Plasma Cutter Power Supply featuring both CPC and Serial Ports (460V) #059489. Delivering 125 amps of raw power, this professional-grade tool effortlessly slices through metals up to 57mm (2-1/4") thick at 125mm/min (5 ipm).
Experience enhanced connectivity and versatility with the inclusion of both CPC and Serial Ports. The advanced technology automatically adjusts gas pressure and detects electrode end-of-life, ensuring precise and consistent cuts without manual adjustments.
This package includes the Powermax125 power supply with CPC and Serial Ports (460V). For detailed operating recommendations, consult the guides or reach out to Welders Supply Company at 1-800-236-8825.
POWERMAX125 ACCESSORIES:
COMPARE POWERMAX125 TO OTHER MODELS:
- Hypertherm Powermax30 XP
- Hypertherm Powermax45 XP
- Hypertherm Powermax65 SYNC
- Hypertherm Powermax85 SYNC
- Hypertherm Powermax105 SYNC
Explore our complete range of Hypertherm products or discover plasma cutter consumable parts and machines at Welders Supply. Elevate your cutting experience today!
Browse all Hypertherm products or see our selection of plasma cutter consumable parts and plasma cutting machines available at Welders Supply.
Hypertherm Powermax 125 Specifications | |
---|---|
Input voltages | 480/600 V, 3-PH, 50/60 Hz |
Input current @ 21.9 kW | 480/600 V, 31/24 A |
Output current | 30-125 A |
Rated output voltage | 175 VDC |
Duty cycle @ 104° F (40° C) | 100% @ 125 A, 480/600 V, 3-PH |
Open circuit voltage (OCV) | 320 VDC |
Dimensions with handles | 23.3" D; 10.8" W; 20.0" H |
Weight w/ 25' torch |
400 V - 105.7 lbs 600 V - 104.7 lbs |
Gas supply | Clean, dry, oil-free air or nitrogen |
Recommended gas inlet flow rate/pressure |
Cutting: 260 l/min (550 scfh) @ 5.9 bar (85 psi) Gouging: 212 l/min (450 scfh) @ 4.1 (60 psi) |
Input power cable length | 10' |
Power supply type | Inverter - IGBT |
Engine drive requirement | 40 kW for full 125 A output |
Certifications | CSA-certified for use in the Americas and Asia, except China |
Warranty | Power supplies have a 3-year warranty and torches a 1-year warranty |
Capacity |
Thickness |
Cut Speed |
---|---|---|
Cutting | ||
Recommended | 1½" | 18 ipm |
1 ¾” | 10 ipm | |
Severance (hand cutting) |
2 ¼” | 5 ipm |
Pierce* | 1" | |
*Pierce rating for handheld use or with automatic torch height control |
Capacity |
Metal removal rate |
Groove profile* |
---|---|---|
Gouging | ||
Typical gouge | 27.6 lbs/hr | 0.17-0.31" D x 0.24-0.390" W |
*Actual groove profile varies with torch angle, arc stretch, and technique |
SHIPPING DIMENSIONS |
|
Height: | 1.00 Inches |
Width: | 1.00 Inches |
Length: | 1.00 Inches |
Weight: | 1 Lb(s) 0 Oz |
- Hypertherm Powermax 125 059536 Operator Manual
- Hypertherm Powermax 125 059536 Service Manual
- Hypertherm Powermax 125 Plasma Cutter 059536 Product Brochure
- Cut Charts for Hypertherm Powermax125 Plasma Cutter for mild steel, stainless steel & aluminum.
- Additional Error Codes and Faults for Hypertherm Powermax 125